Friday 2 September 2016

How to Choose a Flat Panel TV Wall Mount

Selecting a flat panel TV wall mount can be a tough decision because of many sizes available, brands, and types of mounts. selecting the wrong mount could cause you lot of time waste as you try to get it to work properly or you might up return it. This guide has three most common types of mounts, full-motion/articulating, tilting, and low-profile, and then gives a few options on what to look for in the best wall mount.

Full-Motion / Articulating

Full-motion wall mounts provides you the capacity to pull your TV out from the wall and turn it any direction. It can also bend up or down, and push back flat to the wall whenever you want. Full-motion mounts are good for corner installations. This was also well for mounting a TV in old cabinets that were made for a deep CRT television.

Low-Profile

A less-profile mount is used when you need the TV to be close to the wall. They don’t bend or swivel at all, but are very cheap of any type of TV Mount. but, sometimes the TV is so near to the wall that you can’t get the cables to plug in.

Tilting


A bending wall mount is the best choice for all types of installations. It mounts very near to the wall; many bending wall mounts are usually considered “low-profile tilting”. These mounts can handle more weight than a full-motion design and helps for easier installation. The TV will not move up or down on the wall, just bends up or down and it can’t be pulled out from the wall. This is a best choice if the TV is being mounted above eye level.

1 comment:

  1. TV Installation, TV Wall Mounting, TV Installers Are you looking for TV installation in London? Our services include TV wall Mounting on all Wall Types. For more details visit us. TV Mounting

    ReplyDelete